STANDARD FEATURES

• Compact unit
• Easy to use
• Provides address setting and reading
• Can be used on both sensors and modules
• Has the diagnostic ability to display the analog values
• Over 8000 address settings from one battery

APPLICATION

The AP7 is designed for use with all analog sensors and modules.

ADDRESS SETTING:

1. Install sensor onto programmer, ensuring that sensor protrusions align with programmer grooves.

2. Press the left button to switch programmer on. A firmware and battery check message will appear followed by the devices address (factory default addresses are 127 or 255).

3. Set the required address by incrementing the left and right buttons (the display will show three flashing dots if the address being programmed is different from the device's current address).

4. When the desired address is present press the top button to store that address. The flashing dots on the display will no longer be present. The device can be disconnected.